Paver Sealing in Southeast PA: When, Why, and How Often

Paver patio sealing before and after in Bucks County, PA

Paver Sealing in Southeast PA: When, Why, and How Often

Paver patios, walkways, and driveways take a beating in Southeast Pennsylvania. Summer sun fades the color, spring rain feeds moss and weeds in the joints, and winter brings freeze-thaw cycles and road salt. Sealing is one of the simplest ways to protect that investment, but it only works if it’s done at the right time and on a properly cleaned surface.

Here’s what homeowners in Bucks, Montgomery, Chester, and Berks Counties should know before sealing their pavers.

What Does Paver Sealing Actually Do?

A quality sealer soaks into (or coats) the surface of your pavers and the sand between them. Done right, it helps:

  • Resist stains from oil, grease, leaves, and spilled drinks, so they wipe up instead of soaking in.
  • Protect color from UV fading, and can bring back a richer “wet look” if you choose that finish.
  • Lock joint sand in place, which slows weed growth and keeps ants and erosion from pulling sand out of the joints.
  • Reduce water absorption, which matters in a climate like ours where trapped moisture freezes and expands all winter.

Why Cleaning Comes Before Sealing

Sealer locks in whatever is on the surface. If your pavers have dirt, algae, moss, rust, or oil stains when they’re sealed, those stains get sealed in too. That’s why a proper paver sealing job always starts with a deep clean.

A typical clean-and-seal process looks like this:

  1. Deep cleaning to remove dirt, organic growth, and stains, and to clear out old, failing joint sand.
  2. Weed and debris removal from the joints.
  3. Re-sanding the joints, often with polymeric sand, which hardens to help hold the pavers together.
  4. Drying time so no moisture gets trapped under the sealer.
  5. Sealer application in even coats, following the product’s coverage and cure requirements. At Eclipse, we use Seal ‘n Lock products exclusively.

Curious how cleaning methods differ? Our guide to pressure washing vs. soft washing explains why hard surfaces like pavers get a different approach than siding or roofs.

Penetrating vs. Film-Forming Sealers

Most paver sealers fall into two families:

  • Penetrating sealers soak into the paver and leave a natural, matte look. They’re breathable and tend to hold up well on driveways and high-traffic areas.
  • Film-forming sealers (often acrylic) sit on the surface and can add a gloss or “wet look” that deepens color. They look great on patios but usually need refreshing more often.

The right choice depends on how the area is used, the look you want, and how much upkeep you’re comfortable with.

Why We Use Seal ‘n Lock

Every paver sealing job we do uses Seal ‘n Lock products, and only Seal ‘n Lock. After years of field testing, Seal ‘n Lock developed a sealing system and environmentally safe paver protection products that let us re-sand the joints and apply two coats of sealer in the same day, with no downtime and without the cloudy white haze some sealers leave behind. We’ll recommend the right Seal ‘n Lock product for your patio, walkway, or driveway and the look you want. You can learn more about their products at sealnlock.com.

When Is the Best Time to Seal Pavers in Pennsylvania?

Most sealers need dry weather and mild temperatures to cure properly. Many manufacturers call for surface temperatures above roughly 50°F and a dry forecast for at least a day after application, so always follow the label for the specific product. In Southeast PA, that generally puts the sealing window from late spring through early fall.

Brand-new pavers are a special case. Fresh pavers can push out a white, chalky residue called efflorescence for a while after installation. Many installers and manufacturers recommend waiting until that has run its course before sealing, so ask your installer what they recommend for your product.

How Often Should You Reseal Pavers?

There’s no single answer, but a common range is every two to five years. Things that shorten the cycle include:

  • Heavy vehicle traffic on driveways
  • Full sun exposure
  • Film-forming or high-gloss sealers
  • Pools, grills, or outdoor kitchens that bring chemicals and grease

A simple test: sprinkle some water on the pavers. If it beads up, your sealer is still working. If it darkens the surface and soaks right in, it’s time to plan a reseal.

Signs Your Pavers Need Cleaning and Sealing

  • Faded or chalky-looking color
  • Green or black growth, especially in shaded areas
  • Weeds or moss in the joints
  • Sand washing out of the joints or pavers starting to shift
  • Stains that won’t come out with a hose and broom

Professional Paver Cleaning and Sealing from Eclipse

Eclipse Exterior Cleaning has been cleaning homes and hardscapes across the Philadelphia area for over 20 years. We handle the full process, from deep cleaning and joint sand to Seal ‘n Lock sealer application, so your patio, walkway, or driveway is protected and looks its best.

Learn more about our paver and concrete sealing services, or request a free estimate today. Prefer to talk? Call us at 844-600-9274.

No Comments

Sorry, the comment form is closed at this time.